Sealed box

with performance to spare.

Mounting system

<ul><li>Height-adjustable mounting system as a complete kit</li></ul>


<ul> <li>Mesh grating made of stainless steel 1.4301 (V2A)</li> <li>MW 30/10 or 30/30</li> <li>Load class B125 or C250 Bolting possible (ordered separately)</li> </ul>

Outlet units

<ul> <li>Outlet pipes with selectable diameter</li> <li>Individual placement in the channel run</li> <li>Outlet as feed line e.g. to the oil separator</li> </ul>

Perforated surface strip

<ul> <li>To permanently connect the flooring to the perforated strip plate</li></ul>

Anchor tab

<ul> <li>To permanently mount the channel body in the adjoining floor structure</li> </ul>

Channel body

<ul> <li>made of stainless steel 1.4301 or better</li> <li>Nominal width: 150 mm visible width: 208 mm</li> <li>Element length: 4000 mm (adaptable to the length of the run)</li> <li>Material thickness: 1,5 mm</li> </ul>

Sump pit frame

<ul> <li>As connecting element</li> <li>Also for T, corner and cross connections</li> <li>As a frame for a collection basin/sump pit manufactured on site</li> </ul>

Waterproof connection

<ul> <li>Bolted flange</li> <li>NBR seal</li> <li>Complete with stainless steel M6 bolting</li> </ul>

Sump pit basin

<ul> <li>As connecting element</li> <li>Also for T, corner and cross connections</li> <li>Can be placed anywhere in the channel run</li> <li>With sealed, welded stainless steel basin</li> <li>As collection and retention basin</li> </ul>

Front/end cap

<ul> <li>Tightly welded (incl. surface strip)</li> <li>For a clean finish to the channel run</li> </ul>

Send us your project!

<p>Our technical support would be pleased to advise you and prepare a complete project quotation.</p><p> </p><p>Robert Eder:</p><p>Tel.: +43 (6233) 89 00-286</p><p>Email: <a href=""></a></p>