Environmental protection is in our DNA ...
Sustainability is one of the most important elements of our corporate culture. ... Find out more
The milestone
for heavy loads.
The milestone
for heavy loads.
Front/end cap
<ul><li>With tongue-and-groove system</li> <li>Closure of front sides of the channel run</li></ul>
+
Outlet unit
<ul> <li>Sealed pipe connection DN 200 (KG coupling)</li> <li>left/right rotation</li> </ul>
+
One grating – one design
<ul> <li>Consistent continuation of the S-design for the cast iron grating</li> <li>Edge and grating, cathodic dip-coated</li> <li>4-point bolting</li> <li>F900 class</li> </ul>
+
Retention & stepped slope
<ul> <li>Overall height 40-0 (20 cm higher than no 0) – for greater hydraulic performance</li> <li>Longer channel runs possible up to one outlet point</li> <li>Suitable for retention (additional volume: 40 l/m)</li> </ul>
+
Your benefits at a glance:
<ul> <li>Outstanding performance in load classes E 600 & F 900.</li> <li>Exceptionally sturdy and durable thanks to the FILCOTEN® HPC monolithic structure.</li> <li>Innovative design with intelligent features; sits snugly in the concrete bed.</li> <li>Simple to install; easy-to-handle sealing system.</li> <li>Sustainable, 100 % recyclable, made using 100 % green energy.</li> </ul>
All product benefits
Absolutely world class – from E 600 to F 900.
The result is an exceptionally sturdy and robust heavy-duty channel for load classes E 600 & F 900 that delivers on high drainage performance. Whether trucks, semi-trailers or aeroplanes: all of them need reliably drained surfaces to travel over – all of them need the new BG-FILCOTEN® one.
E 600 & F 900
Maintenance unit
<ul> <li>Maintenance access in the style of the channel run</li> <li>Total length 1000 mm</li> </ul>
+
Basic channel NW200, NW150
<ul> <li>Standard construction height no. 0</li> <li>Total length 1.000 mm</li> </ul>
+
Easy access
<ul> <li>simple cleaning of the outlet unit</li> <li>large outlet opening in the channel bottom</li> <li>Suspended sediment bucket for sump unit</li> <li>Total length 1.000 mm</li> </ul>
+
End cap with outlet
<ul><li>With tongue-and-groove system</li> <li>Closure of the run with sealed socket DN 200 (KG coupling)</li></ul>
+
Adapter cap
<ul> <li>For stepped slope installation</li> <li>From height no. 0 to 40-0</li> </ul>
+
####filcoten/eigenschaften####
Singularly one,
simply strong.
Singularly one,
simply strong.
Inlet opening in the channel joint
<ul><li>Inlet opening in the joint with standard slot width for ideal water drainage</li></ul>
+
Cyclist- and pedestrian-friendly
<ul> <li>counter-rotating radial arrangement of the inlet openings</li> <li>Safe to drive and walk over thanks to the S-design of the double slots</li> </ul>
+
Monolithic structure
<ul> <li>element made entirely of FILCOTEN® HPC</li> <li>extremely robust and wear resistant</li> <li>Ideal for dynamic loads in road traffic</li></ul>
+
Tongue-and-groove system for installation in either direction
<ul> <li>Non-directional channel joint for easy and fast installation</li> <li>Interlocking of the groove/tongue/tenon system for accurate, aligned setting of the elements</li> <li>Predefined distance in the joint for optimum function of the insertable sealing profile</li></ul>
+
Highly efficient flume
<ul><li>Channel cross-section with innovative corrugated W-profile design for optimum hydraulic performance on partial and complete filling</li><li>High self-cleaning effect of the W-profile as this causes turbulence in the inflowing water</li></ul>
+
At one with the surrounding environment
<ul><li>Fine finished concrete colour and surface quality</li></ul>
+
Easy-to-handle sealing system
<ul><li>Preformed groove on the front sides for easy insertion of the sealing profile</li><li>Permanent joint sealing through tight fit of the groove/tongue/tenon system</li><li>Requirements according to EN 1433</li></ul>
+
Optimised inlet openings
<ul> <li>slot widths according to EN 1433</li> <li>Innovative S-design for efficient rainwater inflow</li></ul>
+
Extremely durable hold in the concrete bed
<ul> <li>Lateral anchoring pockets for maximum hold in the concrete bed</li> <li>Permanent fit in the foundation thanks to identical linear expansion coefficient</li> <li>Perfect connection between HPC and concrete</li></ul>
+
